Epson Stylus Scan 2000 Manual page 61

The available modes are as follows.
Note:
The selector lights are used to indicate both the magnification ratio and
the copy mode. Press the reduce/enlarge button and the reduce/enlarge
light comes on. The light of the currently selected magnification ratio
also comes on. When you press the copy mode button, the lights change
to indicate the currently selected mode setting.
Copying using the control panel
Once you have made all of the appropriate settings, press the x
copy button to begin copying.
The document is drawn into the document feeder, then reverses
direction and passes back out the document feeder slot. At the
same time, the EPSON Stylus Scan feeds a blank sheet of paper
from the paper feeder, prints the image onto the paper, and ejects
the paper onto the output tray.
Note:
When copying a thin document that has images printed on both sides,
unwanted parts of the image on the opposite side of the paper may appear
in the copy. To avoid this, try selecting the g color or h grayscale copy
mode.
100
color Produces a color copy.
grayscale Produces a shaded black-and-white image.
Use this setting when copying black-and-
white or color images.
B&W Produces a copy that is pure black on pure
white. Use this setting when copying text.