Bosch Uni Condens 8000 F Installation And Maintenance Instructions Manual page 30

Control unit
▶ If available, affix module label to the back panel.
▶ Observe service instructions of the control unit.
▶ Fasten back panel ( fig. 34, [4], page 30) to the base of the casing
[3].
Fig. 34 Fasten back panel to the base of the casing.
[3] Separate the back panel from the base of the casing.
[4] Rear panel
30
▶ Make the plug-in connection in the control unit in accordance with the
labelling on the terminal strip.
▶ Connect the burner cable to the control unit in accordance with the
labelling on the plug-in strip.
▶ Make all electrical connections to the appropriate plug-in connectors
according to the wiring diagram.
▶ If available, connect communication ports of the user interface.
▶ Set the control unit address
4
1
1
3
0010004448-001
Fig. 35 Set the control unit address
[1]
1.
LAN1
LAN2
3.
- +
HMI
Uni Condens 8000 F – 6720867056 (2016/10)
J1
J2
2.
0010011783-001