Fender Mustang LT50 Owner's Manual page 21

been assigned to slot "A" in BANK 2 (as indicated by the illuminated green BANK 2 LED at far left, illuminated
red LED above switch "A" and in the footswitch display window), so step on footswitch button "A" to activate it:
A
BANK 1
BANK 2
STOMP
EFFECTS
FOOTSWITCH: EFFECTS ON/OFF
Effects in a preset (if any) can be turned on and off using the footswitch. To do this, step on buttons "A" and "B"
simultaneously until the amber "EFFECTS" LED illuminates at far left (see illustration below). Footswitch buttons
"A", "B", "C" and "D" are also respectively labeled as "STOMP" (A), "MOD" (B), "DELAY" (C) and "REVERB" (D). Since
one effect only from each of these four categories can appear in a preset, any effects used in a preset are
automatically assigned to the four footswitch buttons.
In the example here, active preset 9 contains one stompbox effect and one reverb effect. Consequently, with
the footswitch in "EFFECTS" mode, the stompbox effect is automatically assigned to footswitch button "A" and
the reverb effect is automatically assigned to button "D" (the preset has no modulation or delay effects, so
footswitch buttons "B" and "C" are inactive). Merely step on these buttons to turn these effects on and off:
A
BANK 1
BANK 2
STOMP
EFFECTS
FOOTSWITCH: TAP TEMPO FOR DELAY EFFECTS
For presets with a delay effect, the footswitch has a tap tempo function for hands-free adjustment of delay
rates. To do this, first put the footswitch in BANK 1 or 2 mode as described above. Select a preset with a delay
effect; step on the footswitch button corresponding to the current selected preset twice or more at the de-
sired tempo. This changes the delay time in the same manner as tapping the TAP tempo utility button on the
amp's control panel (page 12).
IMPORTANT: If delay rate changes are not saved, the preset in use will revert to its original delay rate when
returning to the preset after leaving it, or when turning the amplifier off and back on again. To save delay
rate changes in a preset, follow the SAVE, SAVE AS or REPLACE instructions on pages 6 and 7.
MODE
B
MOD
MODE
B
MOD
19
TUNER
C D
DELAY REVERB
TUNER
C D
DELAY REVERB