Fender Mustang LT50 Owner's Manual page 8

IMPORTANT: If edited amp control settings are not saved, the preset will revert to its original amp control
settings when returning to the preset after leaving it, or when turning the amplifier off and back on again. To
save edited amp control settings, press the SAVE utility button and use the ENCODER to scroll to one of three
options—SAVE, SAVE AS or REPLACE. Each is detailed below.
SAVE: Keeps an edited preset in the same location with the same name. To do this, press the SAVE utility
button and use the ENCODER to scroll to "SAVE". Press the SAVE utility button again or press the ENCODER. A
brief "PRESET SAVED!" screen will then flash before returning to the original preset screen:
22
SUPER
ROCK
SAVE
SAVE AS
REPLACE
SAVE AS: Enables saving a preset in a different position, with or without a different name. To do this, press the
SAVE utility button and use the ENCODER to scroll to "SAVE AS". Press the ENCODER to access a "CHOOSE SLOT" list
of locations where the preset can be moved. Select a new location by turning and pressing the ENCODER:
22
SUPER
ROCK
SAVE
SAVE AS
REPLACE
Whether renaming the preset or not when using "SAVE AS", a name must be entered by pressing the ENCOD-
ER to activate a cursor, then spelling out the name by turning and pressing the ENCODER to scroll through
and select characters. All characters can be cleared by using the ENCODER to scroll to and select "CLEAR ALL".
When name entry is completed for the new location, save it by pressing the SAVE utility button or by using
the ENCODER to scroll to and select "SAVE". A brief "PRESET SAVED!" screen will then flash before returning to
the original preset screen:
RENAME
S U P E R _ _ _
R O C K _ _ _ _
CLEAR ALL
SAVE
PRESET SAVED!
CHOOSE SLOT
21 TOUCH W...
22 SUPER RO...
23 NICE FLA...
04 ROCK A B...
24 VIBRA DO...
25 SURF MU...
PRESET SAVED!
6