Figure 27 Profile Management Settings - Advanced Tab; Table 4 Profile Management Settings - Advanced Tab - Nortel 2201 Installing And Using

28 Chapter 2 Utility Configuration

Figure 27 Profile Management Settings - Advanced tab

Table 4 Profile Management Settings - Advanced tab

Item
Power Save Mode
Network Type
802.11b Preamble
Transmit Power Level
Wireless Mode
Wireless Mode When
Starting Ad Hoc Network
7
214695-B
Once all of the profile settings have been entered, click OK. The newly
created profile will be displayed in the Profile Management tab
Description
Three power management options are "Off," "Normal" and
"Maximum." In Ad Hoc mode, Power Savings function
cannot be enabled.
Specifies the mode of the network. Two options are
"Access Point" and "Ad Hoc."
Two options are "Short & Long" and "Long Only."
Options are "100%," "50%," "25%," "12.5%" and "Lowest."
Three options are "5 GHz 54 Mbps," "5 GHz 108 Mbps"
and "2.4 GHz 11 Mbps."
Options for channel are "Auto" or channels 1-11. This
option is only enabled if "Ad Hoc" is selected for Network
Type.
(Figure 28).