Figure 26 Define Pre-Shared Keys - Nortel 2201 Installing And Using

The profile is now configured to use WPA with TLS as the EAP type.
The following example will configure the profile to connect to a network
using WEP with pre-shared keys.
a
From the Security tab, select the WEP Pre-Shared Key radio button. Click
"Configure..." and the Define Pre-Shared Keys dialog box appears
(Figure 26).

Figure 26 Define Pre-Shared Keys

b Select the key entry method, the key length and enter at least one
pre-shared key in the corresponding field. Click "OK" to save the
pre-shared key information.
Note: All keys must be entered using the same format (ASCII or
Hexadecimal).
c Click "OK" to dismiss the Profile Management dialog box.
The profile is now configured to use WEP with pre-shared keys.
6 Click on the Advanced tab to set advanced settings
the items on the Network Configuration Settings - Advanced tab.
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2201
Chapter 2 Utility Configuration
(Figure 27).
27
Table 4 shows