Table of Contents
Advertisement
Place centre trim panel in po-
sition, paying attention to the
connections 1 to the side pan-
els.
Fit screws 1 and screws 2.
Installing front seat (
Light source
Replacing bulbs for low-
beam and high-beam
headlight
without LED headlights
NOTICE
The positions of the plug, the
spring wire retainer and the
bulb might not be as illustrated
below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
79).
OE
Remove cover 1 by turning it
counter-clockwise to replace
the bulb for the low-beam
headlight.
Remove cover 1 by turning it
counter-clockwise to replace
8
139
z
Advertisement
Table of Contents
