Table of Contents
Advertisement
Remove studs 1 from the rear
wheel, while supporting the
wheel.
Roll the rear wheel out toward
the rear.
Install the rear wheel
WARNING
Use of a non-standard wheel
Malfunction as part of ABS and
ASC control interventions
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Seat the rear wheel on the
rear-wheel adapter.
Install wheel studs 1 and
tighten to specified torque.
Rear wheel to wheel
flange
Tightening sequence: tighten
in diagonally opposite se-
quence
60 Nm
8
137
z
Advertisement
Table of Contents
