8
148
Pull retaining plate in position 1
outwards and remove in an
upward direction.
Slightly lift battery and remove
z
from the mounting to such an
extent that the battery positive
terminal becomes accessible.
Disconnect battery negative
lead 1 and remove the battery.
Installing battery
NOTICE
If the 12 V battery is not cor-
rectly installed or if the polar-
ity of the terminals is reversed
(e.g. in an attempt to jump-start
the vehicle), this can cause the
fuse for the alternator regulator
to blow.
Secure battery positive lead 1.
Push battery into the mounting.
First insert retaining plate into
the mountings 1 and then push
under the battery in position 2.