Table of Contents
Advertisement
ATTENTION
Front wheel installed wrong
way round
Risk of accident
Note direction-of-rotation ar-
rows on tyre or rim.
Roll the front wheel into posi-
tion between the front forks.
Lift front wheel and fit quick-
release axle 1.
Remove front-wheel stand and
firmly compress front forks
several times. Do not oper-
ate front break lever.
Install the front-wheel stand
(
121).
Install screw 1 and tighten to
specified torque. Counter-hold
quick-release axle on the right-
hand side.
Quick-release axle in
telescopic forks
30 Nm
Tighten left-hand axle clamp-
ing screw 2 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Tighten right axle clamping
screw 1 to the specified
torque.
Clamping screw for
quick-release axle in
telescopic fork
19 Nm
Removing the front-wheel
stand.
8
135
z
Advertisement
Table of Contents
