Installation Procedure; Introduction; Taking Receipt Of The Ups; Reporting Transportation Damage - Kohler PowerWAVE 6000 User Manual

Installation Procedure

4
4.1

Introduction

This chapter contains essential information concerning the unpacking, positioning, installing and cabling of the
PowerWAVE 6000 S3 (60-120 kVA) UPS.
Key Point: If you are installing an external battery cabinet supplied by Kohler Uninterruptible Power Ltd you
should refer to the manual that is provided with the cabinet for installation instructions.
WARNING: All cabling operations must be supervised by an authorised electrician or other suitably qualified
person. All installation procedures must be carried out in strict accordance with the instructions contained in
this manual. Kohler Uninterruptible Power Ltd will take no responsibility for any personal injury or material
damage caused by the incorrect installation, cabling or operation of this product.
WARNING: Once the UPS equipment is installed it must be commissioned by an engineer approved by
Kohler Uninterruptible Power Ltd before it is powered-up. Kohler Uninterruptible Power Ltd will take no
responsibility for any personal injury or material damage caused by the application of electrical power to this
equipment before it has been fully commissioned and handed over to the customer.
4.2

Taking receipt of the UPS

The UPS cabinet and accessories are delivered on purpose designed pallets that are easy to off load and move using a
forklift or suitable pallet jack.
CAUTION: Observe the following precautions when off-loading and moving the UPS:
• Always keep the packages in an upright position.
• Do not drop the equipment.
• Due to the high-energy batteries involved and heavy weight, do not stack the pallets.
Depending on the shipping method, the UPS is packed in
a cardboard or wooden container designed to protect it
from mechanical and environmental damage. Further
protection is provided by wrapping the equipment with a
plastic sheet.
Before you accept the shipment you should ensure that
the received package(s) correspond to the description
shown in the delivery documentation. Note that some
ordered optional equipment packages might be shipped
inside the UPS cabinet.
Upon receiving the UPS you should carefully examine the
packing container for any sign of physical damage. External 'TiltWatch' indicators (x2) will indicate RED if the equipment
has been tilted during transportation.
4.2.1

Reporting transportation damage

WARNING: If the TiltWatch indicators indicate that the UPS has been tilted in transit DO NOT connect the
UPS to the mains electricity supply.
If the 'TiltWatch' indicators are red or there are other signs of suspected transportation damage you must inform both the
carrier and Kohler Uninterruptible Power Ltd immediately.
TS_610_01 PowerWAVE 6000 S3 (60-120kVA) User Manual 21/10/19
Good
Bad
Figure 4.1 Tiltwatch indicators
25