4: Installation Procedure; Introduction; Taking Receipt Of The Ups; Reporting Transportation Damage - Kohler PowerWAVE 8000DPA RI (S2) Series User Manual

4
4.1

Introduction

This chapter contains essential information concerning the unpacking, positioning, mechanical installation and cabling of
the PowerWAVE 8000DPA RI (S2) UPS.
WARNING: All cabling operations must be supervised by an authorised electrician or other suitably
qualified person. All installation procedures must be carried out in strict accordance with the instructions
contained in this manual. Kohler Uninterruptible Power Ltd will take no responsibility for any personal injury
or material damage caused by the incorrect installation, cabling or operation of this product.
WARNING: Once the UPS equipment is installed it must be commissioned by an engineer approved by
Kohler Uninterruptible Power Ltd before it is powered-up. Kohler Uninterruptible Power Ltd will take no
responsibility for any personal injury or material damage caused by the application of electrical power to
this equipment before it has been fully commissioned and handed over to the customer.
4.2

Taking receipt of the UPS

The UPS frame and accessories are delivered on purpose designed pallets that are easy to off load and move using a
forklift or suitable pallet jack.
CAUTION: Observe the following precautions when off-loading and moving the UPS:
• Always keep the packages in an upright position.
• Do not drop the equipment.
• Due to the high-energy batteries involved and heavy weight, do not stack the pallets.
Depending on the shipping method, the UPS is packed in
a cardboard or wooden container designed to protect it
from mechanical and environmental damage. Further
protection is provided by wrapping the equipment with a
plastic sheet.
Before you accept the shipment you should ensure that
the received package(s) correspond to the description
shown in the delivery documentation. Note that some
ordered optional equipment packages might be shipped
inside the UPS package.
Upon receiving the UPS you should carefully examine the
packing container for any sign of physical damage. External 'TiltWatch' indicators (2 off) will indicate RED if the equipment
has been tilted during transportation.
4.2.1

Reporting transportation damage

WARNING: If the TiltWatch indicators indicate that the UPS has been tilted in transit DO NOT connect the
UPS to the mains electricity supply.
If the 'TiltWatch' indicators are red or there are other signs of suspected transportation damage you must inform both the
carrier and Kohler Uninterruptible Power Ltd immediately.
Claims for shipping damage must be filed immediately when found, and the carrier must be informed of ALL claims within
seven days of receipt of the equipment. If the equipment is to be stored for longer than seven days before it is installed,
you should unpack it and inspect it for signs of internal damage before you put it into storage. Note that some optional
equipment packages might be shipped inside the UPS package and these too should be inspected.
If the equipment is damaged you should store the packing materials for further investigation.
30
Installation Procedure
Figure 4.1 Tiltwatch indicators
TS_615_01 PowerWAVE 8000DPA RI (S2) User Manual User Manual 8/6/20
Good
Bad