Viessmann Vitodens 200 Technical Manual page 122

3.5 Installation accessories
DHW cylinder
200
Accessories for the installation of the Vitodens 200 and 300 (up to 35 kW)
Connection between the Vitodens and the DHW cylinder
300
Connection set for wall mounted DHW cylinder
Vitocell W 100
comprising:
H Cylinder temperature sensor (not shown)
H Interconnecting pipes on heating water side
H Air vent valve on heating water side
Installation on finished walls
DHW cylinder installed either on the l.h. or the r.h. side of the Vitodens
Connection set for DHW cylinder installed below the boiler
Vitocell W 100 with interconnecting pipes
comprising:
H Cylinder temperature sensor
3 H Interconnecting pipes on heating water side
H Interconnecting pipes on DHW side
Installation on finished and unfinished walls
Connection set for DHW cylinder installed adjacent to the boiler
Vitocell W 100 and 300
comprising:
H Cylinder temperature sensor
H Compression fittings
DHW cylinder either on the l.h. or the r.h. side of the Vitodens
Compression fittings
Solder fittings
122 VITODENS