Connect Hose, Wand & Nozzle - Oreck Quest Pro Canister FC1000 User Manual

Use
Connect Hose
Connect Hose Handle to Wand
Connect Wand to Nozzle
7
• With hose toward rear of the vacuum, push hose
connector into opening in the bag lid.
Note: The flexible hose contains electrical wires for
connection to the power nozzle and should not be used
if damaged. The wires should not be visible through
the outer skin.
• Attach the hose to the telescopic wand by pushing the
handle (E) down into wand until the Handle Release
button (F) locks the handle into place.
• Attach the wand to power nozzle by fitting the button
on the wand (G) into nozzle connector opening (H).
Be sure nozzle is locked in place.
• To release, press down on the wand release pedal (I)
and remove the wand.