Figure 8 Tx Volume Level (Initial) - Kenwood TS-990S Configuring Manual

Figure 8 TX Volume Level (Initial)

This setting is the TX audio drive level to the transceiver. We will further adjust this value later so that
when we go to transmit there will be no ALC action. When we refer to the TX audio gain, this is the
setting we are referring to. If your sound card device has a setting in 'dB', use 0 dB. See the figure above
for an example. Click 'apply' and OK. Close the remaining windows. This completes the basic preliminary
audio device configuration.
Configuring the TS990S for Fldigi
Tutorial by Mitch Baum – AE2A
Page 12