Configuring Fldigi; Figure 27 Fldigi Rx Device Selection - Kenwood TS-990S Configuring Manual

Configuring Fldigi

The first time you start Fldigi, it will begin a very basic configuration by asking you to fill in your call sign,
name, grid square and other basic data about you, your station and other miscellaneous information.
Complete the requested inputs and when the program gets to the Rig Control and Sound Card
configuration, follow the directions that follow.
Left double click on "Fldigi 3.23.07 on the desktop. Left click on "Fldigi configuration "from the top menu
selections. Select the TS-990 RX device from the 'Capture' dropdown as shown below.

Figure 27 Fldigi RX Device Selection

Remember that this is the receive audio device section of the USB Audio CODEC or the 'Audio Output' of
the transceiver. Similarly, select the 'TS-990 TX' device on the Playback dropdown.
Configuring the TS990S for Fldigi
Tutorial by Mitch Baum – AE2A
Page 26