Fldigi Receive Input Level; Figure 41 Fldigi Rx Level Icon - Kenwood TS-990S Configuring Manual

For fldigi, without using an outboard interface

Hide thumbs Also See for TS-990S:

Table of Contents

Fldigi Receive Input Level

The receive audio input level to Fldigi is entirely controlled by Windows once to 'course' level has been

set In the TS-990S USB RX Output menu. Fldigi has an input level indicator (the little diamond icon) in

the lower right portion of the main Fldigi screen. Using the default colors scheme setting in Fldigi, this

icon should remain

GREEN

all of the time. Some excursions into the

YELLOW

zone are unavoidable due

to the varying effects of RX signal strength, AGC action, and band conditions. Flashes of

RED

indicate

that the audio level is consistently too high. Fldigi also provides an easy to use audio level indication to

aid in this adjustment. These two methods work with each other.

This is the 'diamond' Icon:

This is your 'rough' idea of how the audio level is adjusted. The much finer level display is to use the

'WAV' display. You can get to this display by clicking the 'WF' (wave form) button in the lower left corner

of the Fldigi main window.

Configuring the TS990S for Fldigi

Tutorial by Mitch Baum – AE2A

Page 40

Table of Contents