4.
PERIODICAL MAINTENANCE
4.1
Periodical Replacement Parts
The parts are to be replaced periodically as specified below:
Part name
Toner cartridge 2.5K
Image drum cartridge
4.2
Cleaning
Remove any toner or dust accumulated inside the printer. Clean in and around the printer with a piece
of cloth when necessary. Use the handy cleaner (service tool) to clean inside the printer.
Note: Do not touch the image drum, LED lens array, or LED head connector block.
4.2.1
Cleaning of LED Lens Array
Clean the LED lens array or replace the toner cartridge when white lines or stripes (void, light printing)
are generated vertically down the page, as shown below.
Note: The LED lens array must be cleaned with an LED head cleaner included in the replacement toner
kit.
(1) Set the LED head cleaner to the LED lens array as shown in the figure, then slide the cleaner back
and forth horizontally several times to clean the head.
Note: Gently press the LED head cleaner onto the LED lens array.
(2) Throw the cleaner pad away.
42640901TH Rev.1
Condition for replacement
About 2,500 sheets of paper have been printed.
(Type 9)
About 25,000 sheets of paper have been printed.
(Type 9)
See 1.4. (14)
White lines or stripes
(void, light printing)
Oki Data CONFIDENTIAL
Cleaning
Remarks
LED head
Consumables
Consumables
LED head clean pad
LED lens array
42 /