Multi-Pump Mini-Wizard - Siemens BT300 Applications Manual

Siemens BT300 - Startup
11
Sleep function?
If option 'Yes' is selected you will be prompted for three more values:
12
Sleep frequency limit 1
13 Sleep delay 1
14 Wake-up level 1
1.3

Multi-pump mini-wizard

The Multi-Pump mini-wizard asks the most important questions for setting up a Multi-Pump system. The
PID mini-wizard always precedes the Multi-Pump mini-wizard. The keypad will guide you through the
questions as in Chapter 1.2 then to be followed by the set of questions below:
15
Number of motors
16
Interlock function
17
Autochange
If Auto-change function is enabled the following three questions will appear. If Auto-change will not be
used the Wizard jumps directly to question 11.
18 Include FC
19
Autochange interval
20
Autochange: Frequency limit
21
Bandwidth
22 Bandwidth delay
After this, the keypad will show the digital input and relay output configuration done by the
application. Write these values down for future reference.
24-hour support +1-800-877-7545 (Dial 2)
Siemens Industry, Inc. • 5
No
Yes
0.00...320.00 Hz
0...3000 s
Range depends on selected process unit.
1...4
0 = Not used
1 = Enabled
0 = Disabled
1 = Enabled
0 = Disabled
1 = Enabled
0.0...3000.0 h
0.00...60.00 Hz
0...100%
0...3600 s