Menu Structure; Quick Setup; Monitor - Siemens BT300 Applications Manual

Keypad of the drive
2.2

Menu structure

2.2.1

Quick setup

The Quick Setup Menu includes the minimum set of most commonly used parameters during installation
and commissioning. You can find more detailed information on the parameters of this group in
Chapter 3.3.
2.2.2

Monitor

Multi-monitor
On the multi-monitor page, you can collect nine values that you wish to monitor.
STOP
Quick Setup
 

Monitor
Parameters

STOP
FreqReferenc
20.0 Hz
Motor Curre
0.00A
DC-link volt
0.0V
Change the monitored value by activating the value cell (with arrow buttons left/right) and clicking OK.
Then choose a new item on the Monitoring values list and click OK again.
Basic
The basic monitoring values are the actual values of selected parameters and signals as well as statuses
and measurements. Different applications may have different statuses and different number of monitor-
ing values.
Timer functions
Monitoring of timer functions and the Real Time Clock. See Chapter 3.4.3.
PID Controller 1
Monitoring of PID controller values. See Chapter 3.4.4 and Chapter 3.4.5.
PID Controller 2
Monitoring of PID controller values. See Chapter 3.4.4 and Chapter 3.4.5.
Multi-Pump
Monitoring of values related to the use of several drives. See Chapter 3.4.6.
Fieldbus data
Fieldbus data shown as monitor values for debugging purposes at e.g. fieldbus commissioning. See
Chapter 3.4.7.
24-hour support +1-800-877-7545 (Dial 2)
READY I/O
Main Menu
ID: M1
( 4 )
( 5 )
( 12 )
READY I/O
Multimonitor
ID25 FreqReference
Output Freq
0.00 Hz Motor Speed
0.00Hz 0.0rpm
Motor Torque Motor Voltage
0.00% 0.0V
Unit Tempera Motor Tempera
81.9°C 0.0%
Figure 9. Multi-monitoring page.
STOP READY

Monitor
ID: M2.1
Multimonitor
(13)

Basic
(13)

Timer functions
(10)
STOP Ready
FreqReference
ID:1 M2.1.1.1
Output frequency 0.00 Hz
10.00 Hz
FreqReference
Motor Speed
0.00 rpm
Motor Current 0.00 A
Motor Torque 0.00 %
Motor Power 0.00 %
Siemens Industry, Inc. • 13
I/O
I/O
BT11116
2