Manual Channel Search - Philips 14PV172/05 Operating Instructions Manual

Manual channel search

In certain cases the Automatic Channel Search may
not be able to find all of the TV channels (e.g. coded
TV channels). You can then use this manual method
to set the channels.
1
Switch on the set with the
h
2
Press the and the
simultaniously. The installation menu appears on
the screen.
3
Select the line 'MANUAL STORE' with the
B
or menu buttons.
4
Confirm it with the
v w
MANUAL STORE
CHANNEL/FREQ. C-CH.
SEARCH C-21
FINE TUNING
PROGRAMME NR 1
DECODER OFF
STORE
5
Select in the 'CHANNEL FREQ.' line, using the
D C
or buttons, the required describtion
(C-CH = Channel, FREQU = Frequency).
6
Select the 'SEARCH' line.
C
7
Press the button as often as necessary,
until you have found the right TV channel. A
changing channel number will appear on the TV
screen.
If you know the frequency number or channel
number of a TV channel, you can also directly
enter it with the digit buttons
STOP h
button.
Sr
buttons on the set
A
OK
button.
0-9
.
Note:
If you want to allocate a decoder, switch the
decoder function on or off with the
C
button in the 'DECODER' line.
* If you want to change the automatic channel
setting, select the 'FINE TUNING' line.
D C
With the or
automatic TV channel setting.
Important: This re-tuning is only necessary and
useful in special cases,e.g. when there are
stripes on the picture with cable-TV systems.
8
In the 'PROGRAMME NR.' line use the
button to select the required programme
number, e.g.: '1'.
9
Select the 'STORE' line and confirm with the
OK button.
0
If you want to search for further TV channels,
5
start again at step
To finish, press the
NOTE:
* With this set the reception of encoded
TV programmes isn't possible with certain cable
TV installations.
D
or
button you can vary the
P p
.
MENU
button.
9