Timer Programming - Philips 14PV172/05 Operating Instructions Manual

4
OK
Press the button. The programmed code is
now decoded. If the set has decoded correctly,
the resultant data appears on the TV screen.
Note:
If you use VIDEOPlus+ for the first time, the
'PROGRAMME NR.' line appears when you enter
the VIDEOPlus code. Enter the programme num-
ber for this particular TV programme. This num-
ber will be stored automatically.
OK
Press the button to confirm the data is
correct.
* Do you want to use programme number 'E1' in
order to record from an external source (e.g.
satellite tuner)? Confirm the 'E1' programme
number displayed in step
OK
button. Press the
data is correct.
DATE DW PR START END
01 01 17:15 18:45
v w x y 0-9
5
If you want to correct the TIMER-block, you can
choose between setting the date, daily/weekly,
programme number, start time, stop time and
D
VPS with the or the
B
With the or the
0-9
digit buttons you select the data.
6
OK
Confirm with the
Programming is now complete.
The data has been stored in a TIMER block.
7
Switch off with the
remote control.
4 OK
with the
button to confirm the
OK
C
menu button.
A
button or with the
button.
STANDBY m
button on the

TIMER Programming

You can enter and store data in the TV Combi for six
recordings.
You must now enter, step by step, all the data
necessary for the timed recording.
The TV screen will show all the data simultaneously.
TIMER k
1
Press the button on the remote control.
A free TIMER block will appear on the TV screen.
DATE DW PR START END
01 01 17:15 18:45
v w x y 0-9
•
D
With the or the
choose between setting the date, daily/weekly,
programme number, start time, stop time.
•
B
With the or the
0-9 digit buttons you select the data.
• B
With the button you switch between
'D' (daily) and 'W' (weekly).
Please note:
* It is possible to programme a recording 31
days (one month) in advance.
If, for example, today is the 02nd of March and
you programme the date as '01', the recording
will be made on the 01st of April.
For a TV programme starting at midnight, i.e. at
00:00, enter the date of the following day as the
recording date.
2
Have you set all the data correctly? Now press
TIMER k
the button on the remote control.
3
Switch off with the
OK
C
menu button you
A
button or with the
STANDBY m
button.
17