Philips 32HFL4373D/10 User Manual page 31

[Symbol rate mode]:
[Symbol rate 1]:
[Symbol rate 2]:
[Search]:
Set the frequency for the selected MUX
[000.00] and press [Search].
After finding the channels press [Done].
• [Analogue: Manual installation]:
Will install a analogue channels that is
available in the whole frequency spectrum.
Set the necessary values:
[System]:
[Find channel]:
[Fine tune]:
[Store current channel]:
[Store as new channel]:
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.
Child lock
Child lock is a mechanism to prevent viewing a
channel that has a higher Parental rating then
set with this feature.
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Child lock], then press
OK.
3. Select a setting to adjust and press
<OK>:
PrimeSuite xxHFL4373D/10
Automatic
TV will use the preset Symbol
rate (6.900/6.875)
Manual
Option to set Symbol rate 1
and Symbol rate 2
0.000 (to set)
0.000 (to set)
Start the test scan
West Europe
East Europe
UK
France
000.00 (to set)
[Search] > [Done]
000.00 (to set)
Press ▲▼ or ▼ to
fine tune the channel.
[Done]
Store the fine
tuned channel under
the current channel
store under a new
channel number.
Store under a
new channel number.
• [Parental rating]: Set the proper value
(only once a code has been set)
• [Channel lock]: Mark the channels that
are influenced by the Parental rating
• [set code]: Enter a 4 digit code and
press <OK>
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.
Decoder
Decoder is .......
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Decoder], then press
OK.
3. Select a setting to adjust and press
<OK>:
• [Channel]: Set the channel location of
the decoder.
• [Status]: Select
...........................................
4 Press [Back/PP] to return to TV Setup
Menu.
5 Press [Back/PP] to exit.
Page 31