Table of Contents
Advertisement
[Enable Subtitles]
Enables or disables the use of subtitles in a
DVB broadcast channel:
[Off]: No subtitles services available (Prison
Mode)
[On]: Subtitles services available
[Enable Channel Map]
Select Channel Map to be viewed:
[Native]:
Show standard default channel
map
[BDS]:
To be used only if a STB is
connected
[Power settings]
[Power on]
The power on function allows the TV to enter a
specific mode ([On], [Standby], or [Last status]) of
operation when the mains power is activated (cold
start):
[On]: The TV will always turn on (show startup
channel) after the mains power is
activated.
[Standby]: When set, the TV will always turn to
standby (status as defined in Low power
standby option) after the mains power is
activated.
[Low power standby]
The Low power standby option defines the TV to
enter a specific standby mode after pressing the
On/Off button on the remote control. To wake-up
the TV both On/Off button on the RC or TV can
be pressed:
[Fast]: The TV will quickly turn on (show startup
channel. (This mode is having more
power consumption then the Green
mode).
[Green]: The TV will slower turn on (show
startup channel) then the Fast. (This
mode is having less power consumption
then the Fast mode).
[Smart power]
The power consumption for the Smart power
mode is defined by the Smart Picture setting in
the TV Setup part.
[Off]: The TV will start with Standard Smart
Picture setting, but the setting can be
changed in the guest setup mode.
[On]: The TV will start with default Smart
Picture setting and Smart Picture setup
and is not selectable in the guest setup
PrimeSuite xxHFL4373D/10
mode.(with this the power consumption
mode is predictable).
[Auto switch off]
Enables or disables the use of automatic switch
off the TV if no RC action is noticed after 240
minutes:
[Off]: TV will not switch off after 240 minutes
[On]: TV will switch of after 240 minutes
[Delayed reboot]
Enables or disables the use of delayed
standby:
[Off]: No delay added when guest presses
'Off' button.
[On]: Delay added when guest presses 'Off'
button before going into standby; in case
of a wrong guest interaction, activating
the TV after this will be done directly
without any startup delay.
[Clock settings]
[Display Standby]
Defines the brightness level for the Clock LCD
backlight if the TV is in Standby mode:
[Set]:
Off, 1, 2, 3, 4, 5
[Display On]
Defines the brightness level for the Clock LCD
backlight if the TV is in On mode:
[Set]:
Off, 1, 2, 3, 4, 5
[Time Setting]
This is only available if the Time Download is set
to Manual and can be used to set the clock with
the remote control:
[Set]:
Time entry field [xx:xx Hr]
Time to be set by using arrow keys and numeric
buttons
[Time Download]
Select source for clock time:
[Automatic]:
Clock time is retrieved from the
Download Program channel.
[Manual]:
The clock time is set using the Time
Setting option.
[Download Country]
Set selected country as source for clock time.
Page 23
Hide quick links:
Advertisement
Table of Contents
