Philips 32HFL4373D/10 User Manual page 30

8 Press [Start] to continue.
9 If a preset Network Frequency is not
available, or the Network Frequency
Mode is set as manual, Enter the
Network Frequency and press [Done] to
continue.
Press [Cancel] if no DVB-C to install
(only DVB-T and Analogue).
10 Once the channel list is configured, the
TV shows how many digital and analog
channels are captured and returns to the
TV Setup OSD.
11 Press [Done] > [Skip] > [Finish] > [Close]
to return to the TV Setup Menu. If PBS Mode
is [On], the Guest menu is displayed.
More Channel Settings
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Channel settings], then
press OK.
3. Select a setting to adjust and press
<OK>:
• [Languages]: Set the required DVB
languages.
• [Primary audio]: Sets the Primary
audio channel to the selected country
language.
• [Secondary audio]: Sets the
Secondary audio channel to the selected
country language.
• [Primary subtitles]: Sets the Primary
subtitles to the selected country
language.
• [Secondary subtitles]: Sets the
Secondary subtitles to the selected
country language.
• [Primary text]: Sets the Primary text to
the selected country language.
• [Secondary text]: Sets the Secondary
text to the selected country language.
• [Visually impaired]: Sets the feature
Visually impaired to support:
PrimeSuite xxHFL4373D/10
[Off]:
[Speakers]:
[Headphones]:
[Speakers + headphones]:
• [Preferred audio format]: Sets the
feature preferred audio format:
[Standard]:
[Advanced]:
• [Mono/Stereo]: Sets the feature audio
format:
[Mono]:
[Stereo]:
Press OK to confirm your choice.
Channel installallation
Before starting to install channels specific
settings must be set to get the channels to be
installed (see reinstall, page 29)
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Channel settings], then
press OK.
3. Select a setting to adjust and press
<OK>:
• [Channel installation]: Configure the
proper installation settings:
• [Automatic Channel Update]: This TV
can automatically rescan the entire
channel configuration once every day if
this feature is set and the TV is in
Standby mode.
[Off]: No automatic updating
[On]: At TV clock 5.00 AM channel
updating starts
• [Channel Update Message]: Once the
TV has updated its channel list due to an
Automatic Channel Update, this OSD
will inform about the occurrence
[Off]: No updating message
[On]: After an update cycle an OSD
message will be displayed once the TV
is switched on.
• [Digital: Reception test]:
Will install channels that are available in the
setted MUX frequency
Test scan
Page 30