Samsung NX58 Series User Manual page 50

Maintaining your appliance
50 English
NX58R4311SS_AA_DG68-01151A-00_EN.indd 50
2. Lift off and remove the burner grates
from the cooktop. Make note of the
burner sizes and locations of all the
surface burners.
3. Lift off burner caps from top of the
burner heads.
4. Lift the burner heads off the valve
manifolds and starter electrodes.
5. Clean all removable burner parts in
warm, soapy water. Do not use steel-
wool pads or abrasive cleaners on any
burner part.
6. Rinse thoroughly and completely dry all
parts before they are reassembled.
NOTE
Starter electrodes are not removable and
should only be wiped clean when the
controls are in the OFF position.
7. Set all burner heads on top of the
manifold valves in the same location
you removed them from.
The hole on the side of the burner heads
goes over the electrodes.
The burner heads are correctly installed
when they are flat on the top of the
manifold valves.
8. Set all burner caps on top of the burner
heads.
These also need to be flat on top of the
burner heads to ensure proper and safe
operation.
9. Replace burner grates on top of the
range cooktop.
1/25/2019 11:18:35 AM