Samsung NX58 Series User Manual page 47

Stainless steel surfaces
WARNING
Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces.
Abrasive pads and cleaners will scratch the surface and damage the surface finish.
NOTE
To prevent any discolorations and/or grease stains, we recommend cleaning and
removing any spills, spots, and grease from the range after each use.
Stainless steel
surfaces
NX58R4311SS_AA_DG68-01151A-00_EN.indd 47
1. Wipe off any spills with a damp, soft
2. Apply an approved stainless steel
3. Dry and buff with a clean, dry, soft
4. Repeat steps 2 and 3 as necessary.
WARNING
Do not spray any type of cleaner into the manifold panel holes. Within these
holes are ignition switches which carry the current that lights the surface burners.
Spraying into them could damage the range.
cloth.
cleaner to a damp, clean cloth or paper
towel. Clean a small area carefully
following the instructions on the
cleaner. Stainless steel should always be
cleaned with the grain in the stainless
steel, if applicable.
cloth.
English 47
1/25/2019 11:18:29 AM