Program Limitations; Limitations If Using Usb Audio Functions - Kenwood TS-590S Setting Manual

Network command system

Hide thumbs Also See for TS-590S:

Table of Contents

5.3. Program Limitations

CW operations are possible, but keying using normal e-keys is not possible. Strings

entered using the keyboard are collated for transmit operations.

If the PC and TS-590S are connected via a USB cable, audio transmissions can be

transmitted using the USB audio function. In principle, however, there is a delay with USB

audio, so sound may be lost depending on the PC performance and load status. If using a

USB connection for transmitting audio on the host station, the delay due to network traffic

to the remote station is also added, so the delay is further increased.

If audio transmissions are connected via USB terminals, and if playing warning sounds

from the OS or music and video on the PC, the sounds may not emit from the speakers.

Furthermore, depending on the OS sound and properties, the transceiver DATA VOX

function settings, and the modulation path, the audio may be modulated from the

transceiver, so be careful during PC operations and when playing these files.

Depending on the combination of PC and sound functions, normal operations may be

disabled.

Kenwood does not offer support for customer computers.

We recommend using audio cables without using USB audio functions for KNS operations.

(See "4.2. Connecting Audio Cables".)

Table of Contents

Show Quick Links

Table of Contents