Host Station (Transmitter) Configuration - Kenwood TS-590S Setting Manual

3.3. Host Station (Transmitter) Configuration

Transceiver
Transceiver TS-590S
Connection USB
or
RS-232C
Audio
PC Specifications CPU and memory:
Sound
function
Network
function
Software OS
(Transceiver control)
Sound function
Audio transmission
The TS-590S transceiver is supported. The ARCP-590 and ARHP-590
are specialized for the TS-590S, and so other transceivers cannot be
used to configure the system.
Controls that change the frequency or mode are performed by
connecting the transceiver and PC using either a USB cable or
RS-232C cable. (The transceiver has only one RS-232C terminal, so if
using the RS-232C terminal for KNS operations, another device
cannot be connected.)
Created by the customer.
To transmit and receive audio, connect the wireless ACC2 terminal to
the PC sound I/O terminal. For the transceiver terminal specifications,
refer to the device user manual, and for the cable creation and
connection methods, refer to "4.2. Connecting Audio Cables".
Minimum values recommended by the operating system.
HDD:
To install the ARHP-590, a minimum of approx. 100 MB of free disk
space is required. If storing connection logs, additional memory space
is required.
To transmit and receive audio, a sound function is required.
Connects to the internal LAN.
To perform KNS operations via the internet, connect to a network that
is connected to the internet.
A cable network is recommended.
Use Windows XP (SP3 or later), Windows Vista (SP1 or later, 32-bit
version only), or Windows 7 (32-bit or 64-bit version). Other operating
systems are not compatible.
6
VoIP software