4. Settings
4.1. Connecting Communications Cables
Connect the host station PC and TS-590S using an RS-232C or USB cable.
Note: RS-232C cables and USB cables are sold separately. Purchase them from a
commercial outlet.
● If connecting using an RS-232 cable,
ensure that it is a straight cable (9 pin to 9 pin).
● If connecting using a USB cable
(1) Download the installer for the virtual COM port driver from the Kenwood homepage
http://www.kenwood.com/i/products/info/amateur/software_download.html
it according to the procedures.
(2) Connect the PC and TS-590S using the USB cable.
4.2. Connecting Audio Cables
To transmit and receive audio, an audio cable is required. Create an audio cable using the
13-pin DIN plug enclosed with the TS-590S with reference to the following diagram. For
details of the terminal specifications, refer to the TS-590S user manual.
Fig. 4.2.1: Creating an audio cable
11
, then install