ADC Campus-REX2 RS User Manual page 66

Chapter 3 - Configuring the REX2
2 To select DHCP Relay, type
2 and 3, are added to the screen as shown below.
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
ENTER CHOICE>
3 To enter the IP address for the primary DHCP server to which the
Campus-REX2 relays requests, type
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Primary DHCP Server:10.0.0.26
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
4 To enter the IP address for the secondary DHCP server to which the
Campus-REX2 relays requests, type
prompt, enter the IP address.
Required format is nnn.nnn.nnn.nnn
Enter Secondary DHCP Server:192.150.0.54
To delete a DHCP server, enter the IP address 0.0.0.0. If the primary
DHCP server is deleted and a valid secondary DHCP server is defined,
the secondary DHCP server automatically becomes the primary DHCP
server.
5 Type
R
(page 3-46). (Typing
54
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
DHCP SERVICES
1) Service:
2) Primary DHCP Server:
3) Secondary DHCP Server:
(R)eturn
then press ENTER
M will return you to the Main Menu.)
1 ENTER
then press
Local I/F:
Remote I/F: REX2
Relay (None, Relay)
0 .0 .0 .0
0 .0 .0 .0
(M)ain Menu
2 then press
3
then press
to return to the Router Configuration screen
Campus-REX2 RS Interface Card User Manual
. The following fields,
REX2
ENTER . At the
ENTER
. At the