ADC Campus-REX2 RS User Manual page 26

Chapter 1 - Installing and Accessing the REX2
ENTER
2 Press
configured, type that password then press
displayed.
Jul 07, 2003
Local Unit ID:
Remote Unit ID: Inactive
Circuit ID:
ENTER CHOICE>
Once you are logged into the Campus unit through the console port, there is
no timeout defined for the session. You will stay connected until you either
log out or the Campus unit detects a disconnected console cable (DTR signal
changes to inactive).
14
(default password) to log on. If a password was previously
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
1) SYSTEM STATUS
2) REX2 CONFIGURATION AND STATUS
3) SYSTEM CONFIGURATION
4) MAINTENANCE
5) REMOTE LOGON
ENTER
Local I/F:
Remote I/F: Inactive
MAIN MENU
(L)ogout
Campus-REX2 RS Interface Card User Manual
. The Main Menu is
REX2