Table of Contents
Advertisement
Chapter 3 - Configuring the REX2
Configuring the Bridge Unit IP
The Unit IP configuration sets up the way that the bridge receives its
IP configuration (statically or dynamically) and then provides fields where
the IP address, subnet mask, and default gateway are entered.
1
To configure the Unit IP information, from the REX2 Configuration and
Status screen type
screen is displayed.
Jul 07, 2003
Local Unit ID:
Remote Unit ID:
Circuit ID:
UNIT IP
ENTER CHOICE>
A DHCP server should be set up and active on your LAN prior
to enabling DHCP client for the Campus-REX2 LAN port.
1
To select a dynamic IP configuration for the bridge, type
ENTER
to select DHCP Client. Static is the default configuration.
When set to DHCP Client, the Campus-REX2 LAN port automatically
receives IP configuration (IP address, subnet mask, and default gateway)
from a DHCP server on the LAN and displays this configuration in those
respective fields on the screen.
When the IP Configuration is set to static, enter the IP address,
subnet mask, and default gateway for the Campus-REX2 LAN port
as described in steps
38
4
then press
ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
BRIDGE CONFIGURATION
1) Bridge Filter Age (sec):
2) SPANNING TREE CONFIGURATION
3) BRIDGE TABLE
4) ARP TABLE
5) IP Configuration:
6) IP Address:
Subnet Mask:
7) Default Gateway:
(R)eturn
2
and 3.
ENTER
. The Bridge Configuration
Local I/F:
Remote I/F: REX2
300
(10 - 100000)
Static
(Static, DHCP Client)
192.168.
1.
1
255.255.255.
0
0.
0
.0
.0
(M)ain Menu
Campus-REX2 RS Interface Card User Manual
REX2
5
then press
Hide quick links:
Advertisement
Table of Contents
