General Information; Safety Information - Philips FW880PP/22 Instructions For Use Manual

FW880P-880W/22-Eng 6/15/00

GENERAL INFORMATION

General Information
• The type plate (which contains the serial
number) is located at the rear of the system.
• Recording is permissible if copyright or other
rights of third parties are not infringed.
• This product complies with the radio
interference requirements of the European
Community.
Environmental Information
All unnecessary packaging material has been omitted.
We have done our utmost to make the packaging easily
separable into three mono-materials: cardboard (box),
polystyrene foam (buffer) and polythene (bags, protective
foam sheet).
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company.
Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and
old equipment.
Acknowledgement
Dolby Pro-Logic, the Dolby B NR System and the double-
D symbol d are trademarks of Dolby Laboratories
Licensing Corporation.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
4:06 PM Page 5
Accessories
(Supplied)
– Remote control
– Batteries (2 x AA size) for remote control
– AM loop antenna
– FM antenna wire
– AC power cord
– Philips FB 5CS Surround package (includes 2 x
surround rear speakers and 1 x center speaker) for
model FW880P only.
– Model FB 209W wireless surround speaker package
(includes 2 x wireless active surround rear speakers
and 1 x center speaker and a transmitter unit) for
model FW880W only.

SAFETY INFORMATION

Safety Information
• Before operating the system, check that the operating
voltage indicated on the type plate (or the voltage
indication beside the voltage selector) of your system
is identical with the voltage of your local power
supply. If not, please consult your dealer. The type
plate is located at the rear of your system.
• When the system is switched on, do not move it
around.
• Place the system on a solid base (e.g. a cabinet).
• Place the system in a location with adequate
ventilation to prevent internal heat build-up in your
system.
• The system incorporates a built-in safety feature that
prevent overheating.
• Do not expose the system to excessive moisture, rain,
sand or heat sources.
• Under no circumstances should you repair the unit
yourself, as this will invalidate the warranty!
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens of the CD unit
inside the system. Should this occur, the CD player
will not operate normally. Leave the power on for
about one hour with no disc in the unit until normal
playback is possible.
• Electrostatic discharge may cause unexpected
problems. See whether these problems disappear if
you unplug the AC power cord and plug it in again
after a few seconds.
• To disconnect the system from the power supply
completely, remove the AC power plug from the
wall socket.
5