Recording - Philips FW880PP/22 Instructions For Use Manual

FW880P-880W/22-Eng 6/15/00

RECORDING

STANDBY . ON
L C R
DOLBY PRO LOGIC
S S
DISPLAY
FW 860P
ROCK TECHNO
CLOCK • TIMER
DIGITAL SOUND CONTROL DISPLAY
CLASSIC PERSONAL
RECORD
DIGITAL SOUND CONTROL
IT IS RECOMMENDED THAT YOU SWITCH OFF
DOLBY PRO LOGIC WHEN RECORDING.
Notes:
– For recording, use only tape of IEC type I (normal
tape) or IEC type II (Chrome).
– The tape is secured at both ends with leader tape. At
the beginning and end of tape, nothing will be
recorded for six to seven seconds.
– The recording level is set automatically, regardless of
the position of VOLUME, DBB, Incredible Surround or
DPL. Dolby B NR can be selected for Tuner or CD
recording.
– To prevent accidental recording, break out the tab on
the left shoulder of the tape side you want to protect.
– If " CHECK TAPE " is displayed, the protection
tab has been broken. Put a piece of clear adhesive
tape over the opening. Do not cover the Chrome tape
detection hole when covering the tab opening.
24
4:07 PM Page 24
20+ 1 DBB
20 2
19 3
18 4
STEREO
INCREDIBLE SURROUND
17 5
16 6
15
7
14 8 FRONT
13 9 SHUFFLE
12 11 10 FM BACK HSD REPEAT
CD
MW REC TIMER VOCAL
TEXT LW PROGRAM FADER
MINI HIFI SYSTEM
CD 1 • 2 • 3 BAND TAPE 1 • 2 VIDEO PROGRAM
C D TUNER TAPE AUX•DVD
SEARCH STOP PLAY PAUSE PREV NEXT
TUNING PRESET
CLEAR SIDE A • B
HIGH
POWER
NORM•
FAST• DUBBING CD SYNCHRO DOLBY B NR
One Touch Recording
• For One Touch Recording, as soon as you press
RECORD, the current source (CD, TUNER, TAPE 1 or
AUX•DVD) will be recorded on tape deck 2
1 Load a blank tape in tape deck 2.
2 Press RECORD â.
™ The REC flag is displayed.
3 Press STOP Ç to stop recording.
Note:
– When you press RECORD at TAPE 2 mode,
" SELECT SOURCE " will be displayed. One
Touch Recording is not possible at TAPE 2 mode.
Recording from other sources
deck 2)
DOLBY PRO LOGIC
1 Press TAPE to select tape deck 2 .
DYNAMIC INCREDIBLE
BASS BOOST SURROUND
2 Load a blank tape into tape deck 2 with the open side
downward.
3 Press SIDE on the remote control to select the
recording side.
™ The FRONT or BACK flag will be displayed,
depending on the side selected.
4 Press REV MODE to select the playback mode
( å å or ∂ ∂ ).
5 Press DOLBY NR to record with Dolby NR (except in
VOLUME
TAPE 1 mode) .
6 Press CD, TUNER, TAPE 1 or AUX•DVD.
REV. MODE • Start playback of the selected source.
7 Press RECORD â to start recording.
™ The REC flag is displayed.
8 Press STOP Ç to stop recording.
Notes:
– Only å å or ∂ ∂ mode is available during recording.
– During recording, it is not possible to listen to
another sound source.
(only on tape