Preparation - Philips FW880PP/22 Instructions For Use Manual

FW880P-880W/22-Eng 6/15/00
A AM Antenna Connection
Connect the supplied loop antenna to the AM AERIAL
terminal. Place the AM loop antenna far away from the
system and adjust its position for the best reception.
B FM Wire Antenna Connection
Connect the supplied FM wire antenna to the FM 75
terminal. Adjust the position of the FM antenna for the
best reception.
Outdoor Antenna
For better FM stereo reception connect an outdoor FM
antenna to the FM AERIAL 75
coaxial wire.
C Front Speakers' Connection
• Connect the right speaker to Front terminal R, with
the red wire to + and the black wire to -.
• Connect the left speaker to Front terminal L, with the
red wire to + and
the black wire to -.
• Clip the stripped
portion of the speaker
wire as shown.
For Dolby Pro Logic Connection, see page 8.
D Center Speaker Connection
• Connect the black or non-marked wires to the black
CENTER terminal and the blue or marked wires to the
blue CENTER terminal.
4:06 PM Page 7
E Rear Speakers' Connection
(For model FW880P only)
• Connect the black or non-marked wires to the black
REAR terminals and the white or marked wires to the
grey REAR terminals.
F Wireless Surround Out Connection
(For model FW880W only)
You may connect transmitter unit of the wireless rear
speakers (Model FB 209W is supplied with FW880W) to
the SURROUND OUT terminal instead of the wired rear
speakers. Be sure to follow the instructions supplied
terminal using a 75
with the wireless rear speakers.
Note:
– Availability of wireless transmitter and its peripherals
are subjected to the approval of local authorities.
Please check with respective local safety or
approving authority.
G Connecting other equipment to your
system
12 mm
You can connect the audio left and right out terminals of
unlock lock a TV, VCR, Laser Disc or DVD player to the AUX IN
terminals at the rear of the system.
H Subwoofer Out Connection
You can connect either an optional active subwoofer or
an optional wireless active subwoofer to the
SUBWOOFER OUT terminal. The wireless system uses a
radio frequency transmitter. The subwoofer reproduces
just the low bass effect (e.g. explosions, the rumble of

PREPARATION

the spaceships, etc.). Be sure to follow the instructions
supplied with the subwoofer unit.
I Line Out Connection
(wireless ready)
You may install additional front active speakers away
from the system (e.g. in another room) to reduce the
inconvenience of running long speaker wires across
rooms. You can place as many remote speakers as you
like provided that they operate at the same radio
frequency. Connect the wireless radio frequency
transmitter to the LINE OUT terminals. Place the active
speakers at your preferred location. Be sure to follow the
instructions supplied with the active speakers.
J Digital Optical Out
You can record the digital sound from the CD, through
this output, on any audio equipment with digital input
(e.g. digital amplifier, Digital Audio Tape (DAT) deck,
Digital to Analog Converter and Digital Signal Processor).
Connect one end of the optical cable (not supplied) to
the DIGITAL OPTICAL OUT socket and the other end to
the audio equipment with digital input. When the
DIGITAL OPTICAL OUT socket is not used, be sure to
cover the socket with the supplied dust cap.
K AC Power Supply
After all other connections have been made, connect the
AC power cord to the system and to the wall outlet.
7