Mounting The Handlebar - Stihl RMA 510 Instruction Manual

English

Mounting the Handlebar

WARNING
Place the machine on a firm and level
surface for the following work.
WARNING
The lower handle, and upper handle,
can be folded down after rotating the
locking knobs. Check that the star knobs
are firmly tightened. Hold the handle at
the highest point with one hand and
rotate the locking knobs. Risk of injury.
WARNING
The upper handle can be folded over by
loosening the star knobs. Hold the
handle at the highest point with one
hand and loosen the star knobs. Risk of
injury.
Assembling the Handle
Unfolding the lower handle
2
1
Rotate the locking knobs (1) 90°.
N
Unfold the lower handle (2).
N
10
Line up the locking knobs (1) in one
N
of the three positions on the
brackets (3).
Rotate the locking knobs (1) 90° so
N
that they engage the holes in the
brackets (3).
Make sure that both locking knobs (1)
are in the same position.
Mounting the upper handle
9
90°
Line up holes in upper handle (4)
N
and lower handle (5).
1
3
90°
8
6 4
5
7
Insert bolts (6) through holes in
N
upper handle (4) and lower handle
(5).
Screw the star knobs (7) onto the
N
bolts (6) and tighten them down
clockwise.
Fit cables (8) in the cable clip (9),
N
Folding Down the Handle
The handle can be folded down to clean,
transport or store your cordless lawn
mower.
Make sure cables are not pinched when
you fold down the handlebar.
Folding down the lower handle
2
1
Rotate the locking knobs (1) 90°.
N
Fold down the lower handle (2).
N
90°
RMA 510