1550C/1555
Calibration Manual
Button Test
Use the pushbuttons to control the product, view test results, and scroll through
chosen test results. Table 3 is a list of the pushbuttons and their functionality.
Item
Turns the product off and on.
Push
Function menu, use the arrow pushbuttons.
Scrolls through test voltages, stored test results, timer duration, and changes test tag ID
characters. Also used to answer "yes" to yes/no prompts.
After a memory location is set,
These include voltage, capacitance, polarization index, dielectric absorption ratio, and current.
Use to scroll through test voltages, stored test results, timer duration, and memory locations. Also
used to answer "no" to yes/no prompts.
Use for Test Voltage mode to start incrementally setting the test voltage between 250 V and
10 000 V.
Starts and stops a test. Push and hold for 1 second to start a test. Push again to stop a test.
8
FUNCTION
1
2
3
to go to the Function menu. Push again to exit the Function menu. To scroll within the
Table 3. Pushbuttons
4
5
Description
displays the test parameters, test results stored in memory.
ENTER
TEST
6
7
ghh02.eps