Hot Water Temperature Setting - Navien NR-10P User Manual

Hot Water Temperature Setting

1
If the "DHW" button is pressed, 'hot water' icon
flickers and temperature of hot water (30~50
℃) is displayed. If temperature over 50℃ is
needed, "DHW" and "Heating" button shall be
pressed simultaneously. Then user can adjust
set temperature of hot water up to 65℃.
26
2
When the "hot water" icon flickers turn the
dial to set desire hot water temperature. After
a few seconds, the desire temperature is
saved and get back to the previous function.
DHW Pre-heating Setting
1
Enabling pre-heating function (when icon is
off ) : Press and hold the "DHW" for 3 seconds
and the "pre-heating" icon will appear.
2
Disable pre-heating function (when icon is on) :
Press and hold the "DHW" for 3 seconds and the
"pre-heating" icon will disappear
27