Remote Controller On / Off - Navien NR-10P User Manual

Remote Controller ON / OFF

Press the "ON/OFF" button to turn the LCD
on and off.
6
When the "ON/OFF" button is pressed, the
LCD display switches to only a clock display. In
this status any heating mode & DHW are
disabled.
Setting the Clock
1
Press and hold "Program" button for 3 seconds,
the "minutes" blink on the timer.
2
Use the center dial to move around the "minutes"
and tap the "Program" button and the "hour" will
blink. Use the center button to adjust the hour. Tap
the "Program" button to adjust the AM/PM setting.
Leave alone and the display will automatically set.
7