Stand By - Navien NR-10P User Manual

K Factor (Option)
1
Tap "Heating" until "K Factor" icon appears.
Leave alone and the display will automatically
set.
12
2
Tap "Heating supply" icon is blinking use the
center dial to set the desired value between
0.5~6. Leave alone and the display will
automatically set and return to its original
state.

STAND BY

When the need for heat is not needed, the unit will set itself to operate in "stand by" mode.
1
To Enable: Tap "Stand By" and the "stand by"
icon will appear.
2
To Disable: Tap "Stand By" and the "stand by"
icon will disappear and the display will return
to its original state.
13