Installing The Navilink Lite; Installing On A Navien Boiler/Water Heater - Navien NaviLink Lite User Manual

Installing the NaviLink Lite

You can install the NaviLink Lite on a boiler or water heater unit using the magnet plates
affixed on the rear, or on a wall using the supplied screws and anchors.
NOTICE
This device is designed for indoor use only. Please install and use this device indoors.

Installing on a Navien Boiler/Water Heater

With the magnet plates on the rear, you can attach the NaviLink Lite to the boiler or water
heater case.
M
CO
W I-F I
15