Toshiba 100CS Manual page 123

4.10 Diskette Drive (FDD)
Removing the FDD
To remove the FDD, follow the steps below and refer to figures 4-21 and 4-22.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack, optional PC card, optional memory module, HDD,
keyboard, sub-battery and VGA board, top cover and display assembly, and
membrane switch as described in sections 4.2 through 4.9.
Disconnect the flexible cable from PJ5 on the system board .
3.
Remove four M2.5x6 screws and lift out the drive.
4.
4-24
Figure 4-21 Removing the diskette drive (FDD)
100CS