Toshiba 100CS Manual page 118

4.8 Top Cover and Display Assembly
Removing the Top Cover and Display Assembly
To remove the top cover and display assembly, follow the steps below and refer to figures
16 to 4-18.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack, optional PC card, optional memory module, HDD,
keyboard, and sub-battery and VGA board as described in sections 4.2 through
4.7.
Turn the computer upside down and remove three M2.5x8 silver screws and four
3.
M2.5x6 screws securing the top cover and display assembly.
Turn the computer over and lift back the top cover and display assembly so you
4.
can disconnect cables.
100CS
Figure 4-16 Removing the top cover screws
4-
4-19