Toshiba 100CS Manual page 120

Release six latches securing the top cover and remove the top cover and display
8.
assembly.
Installing the Top Cover and Display Assembly
To install the top cover, follow the steps below and refer to figures 4-16 to 4-18.
Seat the top cover and display assembly .
1.
Secure one M2.5x8 silver screw on sub-battery base.
2.
Connect the LED panel cable to PJ14.
3.
Connect the panel close sensor cable to PJ10 on the system board.
4.
Connect the Real Time Clock battery to PJ3 on the system board.
5.
Turn the computer upside down and secure three M2.5x8 silver screws and four
6.
M2.5x6 screws .
7. Install the sub-battery and VGA board, keyboard, HDD, optional memory module,
optional PC card, and battery pack as described in sections 4.7 back through 4.2.
100CS
4-21