Quadra-Fire Pioneer-II-C Owner's Manual page 15

Front
Stack
Figure 3.23 Stacking Wood
Front
Stack
Figure 3.24 Stacking Wood
Medium/Low Burn
• Open the door and load the wood the same as the
high burn. Then partially close the door leaving it open
around 4-8 inches for up to 5 minutes or until the wood
is burning good then close the door. Let it burn for up
to 20 minutes before setting the combustion air control
to the desired setting.
COMBUSTION AIR CONTROL SETTINGS
• LOW - all the way to the left.
• MEDIUM - from the low setting go up to 1/2 inch to the
right.
• HIGH - all the way to the right until resistance is felt.
NOTE: The ACC should only need to be activated when
starting from a cold start or if a lively coal bed isn't pres-
ent when reloading.
Back
Stack
Air Gap Between
Stacks
Back
Stack
Air Gap Between
Stacks
Quadra-Fire • Pioneer-II-C Owner's Manual • 4184-900 • Rev C • 02/20
Figure 3.25 Door Open 2-4 Inches
Figure 3.26 Door Latched Lightly
Figure 3.27 Door Fully Closed
15