Table of Contents
Advertisement
Return Authorization
PROCEDURE FOR RETURNS
To return a product to Krell, please follow this proce-
dure so that we may serve you better:
1. Obtain a Return Authorization Number (R/A
number) and shipping address using the Krell
website.
2. Insure and accept all liability for loss or damage
to the product during shipment to the Krell fac-
tory and prepay all freight (shipping) charges.
The product may be hand delivered if arrangements
with the Service Department have been made in
advance. Proof of purchase will be required for war-
ranty validation at the time of hand delivery.
TO EXPEDITE SERVICE
Fill out and e-mail the Service Request Form post-
ed on the Krell website. To access the form, simply
click on the Service Request Form in the navigation
tier on the Krell home page at:
http://www.krellonline.com
or paste the following URL into your browser:
http://www.krellonline.com/service2.php?id=79&pag
e=serviceRA
SPECIFICATIONS
Inputs
30-pin iPod-device type
1 3-conductor 3.5 mm connector
Audio Outputs
1 pair balanced via XLR connectors
1 pair single-ended via RCA connectors
Video Outputs
1 S-video via a DIN connector
1 Composite via a RCA connector
Control Inputs
1 RS-232 input via a 9-pin D-subminiature connector
Control Outputs
1 12 VDC trigger output via 2-conductor
3.5 mm connectors (500 milliamps maximum
per output)
Input impedance
Single-ended: 47.5 k Ohms
Output impedance
Balanced: 50 Ohms
Single-ended: 25 Ohms
Volume Control
256-step Digital Control
Input Overload
Single-ended: 4 V RMS
Output Overload
Balanced: 16 V RMS
Single-ended: 8 V RMS
Krell
12
Krell
Specifications
PACKING MATERIALS
IMPORTANT: Use the original packaging to ensure
the safe transit of the product to the factory, dealer,
or distributor. Krell may, at its discretion, return a
product in new packaging and bill the owner for
such packaging if the product received by Krell was
boxed in nonstandard packaging or if the original
packaging was so damaged that it was unusable.If
Krell determines that new packaging is required, the
owner will be notified before the product is returned
To Purchase Additional Packing Materials.
Please contact your authorized Krell dealer, distribu-
tor, or the Krell Service Department.
KRELL SERVICE DEPARTMENT
TEL
203-298-4020
Monday-Friday
9:00 am to 5:00 pm, EST
FAX
203-795-2287
E-MAIL
service@krellonline.com
WEB SITE
http://www.krellonline.com
Frequency Response
20 Hz to 20 kHz +0.7 dB, -0.0 dB
0.1 Hz to 90 kHz +0.7, -3 dB
Tone Control Range
Bass:+8 dB, -7 dB
Treble: +6 dB, -6 dB
Total Harmonic Distortion Plus Noise
Balanced Output: <0.002%, 20 Hz to 20 kHz,
4 V RMS or 4 mA RMS
Signal-to-noise Ratio
Wideband, Unweighted: >94 dB
"A" Weighted: >97 dB
Power Consumption
Standby: 10 W
Power on: 25 W
Dimensions
13 W x 2.8 H x 10.9 D in.
33.0 W x 7.0 H x 27.7 D cm
Weight
Unit Only: 10 lb., 4.5 kg
All operational features, functions, specifications, and poli-
cies are subject to change without notification.
Your KID product serial number is:
Advertisement
Table of Contents
