Related Manuals for Krell Industries Papa Dock iPod Docking Station
Summary of Contents for Krell Industries Papa Dock iPod Docking Station
- Page 1 Krell Interface Dock Papa Dock Owner’s Reference POWER BASS TREBLE VOLUME INPUT POWER...
- Page 2 (89/336/EEC) and the low-voltage directive (73/23/EEC). Krell ® is a registered trademark of Krell Industries, Inc., and is restricted for use buy Krell Industries, Inc., its subsidiaries, and authorized agents. iPod is a trade- mark of Apple, Inc., registered in the U.S. and other Countries.
- Page 3 Introduction Overview List of Illustrations INTRODUCTION Thank you for your purchase of the KID, the Krell Interface Dock, and/or the Papa Dock. The KID can be operated alone, or docked in the optional Papa Dock, a dedicated 150 W power amplifier designed specifically by Krell for use with the KID.
- Page 4 Unpacking the KID Unpacking the Papa Dock UNPACK THE KID One person can remove the KID from its shipping box safely and easily. 1. Open the shipping carton top flap. You see the literature pack containing: 1 Owner’s Reference 1 Warranty Registration Card 2.
-
Page 5: Install The Battery
Affix the iPod-device Support to the KID Top Cover Install the Battery in the KID Remote Placement Considerations AFFIX THE iPOD-DEVICE SUPPORT TO THE KID TOP COVER IMPORTANT: Affix the iPod-device support before inserting the iPod-device into the dock connector (4). 1. - Page 6 Placement Considerations, continued The KID / Papa Dock Connection PLACEMENT CONSIDERATIONS Component Ventilation, continued If the KID is placed in a closed cabinet, more than eight inches (20 cm) of clearance may need to be provided above and below the component, or small fans may be needed to increase ventilation.
- Page 7 Connect to Your System AC Power Guidelines for the KID KID Back Panel Connections CONNECT TO YOUR SYSTEM Krell recommends using balanced interconnect cables. Balanced interconnect cables not only can minimize sonic loss but also are immune to induced noise, especially for installations using long cables.
- Page 8 Krell dealer, distributor, or Krell before using any devices designed to alter or sta- bilize the AC power for the Papa Dock. PAPA DOCK PAPA DOCK KRELL INDUSTRIES, INC. 45 CONNAIR ROAD ORANGE, CT 06477-3650 VIDEO OUT 12VDC 30 mA MAX.
-
Page 9: Operation
Insert the iPod-device into the KID Dock Connector Power LED Color Guides Operation FIGURE 4 Inserting the iPod-device Into the Dock Connector INSERT THE IPOD-DEVICE INTO THE KID DOCK CONNECTOR When the KID or the Papa Dock are plugged into AC power, connect the iPod-device: 1. - Page 10 Front Panel Functions Remote Control Functions FIGURE 6 KID Front Panel Docking station inset: Inset shows iPOD-device support affixed to the top cover of the chassis with the dock connector below TOP ONLY 22 Docking station (see inset above) FRONT PANEL ONLY 23 Auxiliary input FRONT PANEL AND REMOTE 24 Power button/key...
-
Page 11: Remote Only
Front Panel and Remote Control Functions for the KID TOP AND FRONT PANEL ONLY 22 iPod-device docking station Connect the iPod-device to the KID by plug- ging it into the dock connector. The iPod- device takes the KID in and out of stand-by. When an iPod-device is connected to the dock connector, the KID automatically moves to the operational mode from stand-by. - Page 12 Specifications KID SPECIFICATIONS Inputs 1 30-pin iPod-device type 1 3-conductor 3.5 mm connector Audio Outputs 1 pair balanced via XLR connectors 1 pair single-ended via RCA connectors Video Outputs 1 S-Video via a DIN connector 1 Composite via a RCA connector Control Inputs 1 RS-232 input via a 9-pin D-subminiature connector Control Outputs...