Table of Contents
Advertisement
Troubleshooting
If You Cannot Make Prints as You Want
Problem
Misfeeds occur frequently.
Parts of the image are not
3
printed.
Print shadow appears.
The print image appears too
light.
Scratches appear on the print
image.
The images of drum 1 and 2
do not mix well together.
2nd printing with another
drum is unsatisfactory.
Roller marks appear when
you print onto the reverse side
of paper.
44
Cause
Improper paper type is select-
ed.
The image is too wide.
The background image densi-
ty is too high.
The print speed is too fast.
Sharp edges in the machine
may have scratched your
prints.
If the image density is too
high, the background colour
might appear strong.
The 1st print image is still wet. Wait until the 1st image be-
1st printed image is still wet
and the press roller becomes
dirty.
Action
Select proper paper type.
Reference
Refer to the master making
unit's operating instruc-
tions.
• Set larger size paper.
• Return the drum unit to
the master making units,
and then reduce the print
image size.
• Switch drum 1 and 2.
• Set thick paper.
Lower the print speed.
• Increase the print speed.
• Set thick paper.
• Switch drum 1 and 2.
• Use the image of drum 1
for background.
comes dry.
• Wait until the 1st printed
image becomes dry.
• Set thick paper.
• Wipe off the ink on the
press roller. ⇒ p.59 "When
the Press Roller is Dirty"
Advertisement
Table of Contents
