Table of Contents
Advertisement
Chapter 5
Setting Up Discovery and Device Management
Enter SNMP Community Strings for All Managed Devices
Note
Step 1
Step 2
Step 3
78-16778-01
SNMP community strings are used for discovery and for enabling WLSE features,
such as AP configuration jobs and radio management. The community string must
be set on each device, as described in
Devices—Overview."
as necessary.
If you are importing devices, you do not need to enter their community
strings.The community strings will be imported along with the devices and will
be listed in WLSE Communities screen, in which you can modify and delete
strings as required. For more information, see
To configure community strings on the WLSE, perform the following steps:
Select Devices > Discover > Device Credentials > SNMP Communities.
This screen contains a default entry which can cover all devices, provided
Note
device community strings are set to the default (public).
To add an entry:
Enter data in the individual text boxes: IP address, Read Community,
a.
Timeout, SNMP Retries, and Write Community.
Click Add to add the community string to the list.
b.
Result: The community string appears in the list of entries.
To modify an entry:
Select the entry in the list of entries.
a.
Result: The individual text boxes are populated with the data from the entry.
Change the desired fields in the individual text boxes.
b.
Click Modify.
c.
The IP address field of an existing entry cannot be changed.
Note
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
Chapter 4, "Setting Up
You can enter as many community strings on the WLSE
Adding Device Credentials to the WLSE
Import Devices, page
5-11.
5-3
Advertisement
Table of Contents
